SSA-250®FX

6 Mic & 2 Aux Inputs.
Built-in digital effect processor for 2 Mic Inputs.
Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme.
Line Input for connecting the output from any external mixer or permitting SSA-250®M to be used as a Booster Power Amplifier.
Resettable circuit breaker for protection against overload and short circuit. Instant transfer to DC power (Car Battery) if AC power fails.
Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units.

• Power Output  300W
• Max., 250W RMS at 10% THD 220W RMS at 5% THD, 200W RMS at 2% THD 
• Output Regulation  ≤ 2 dB, no load to full load at 1kHz 
• Input Channels  6×Mic 0.65mV/4.7kΩ, 2×Aux 100mV/470 kΩ, 1 × Line 1V/50kΩ 
• Delay System  Digital Signal Processing  Delay Range Setting  60-300ms 
• Frequency Response  50-15,000Hz ±3dB  Signal to Noise Ratio  60dB 
• Tone Controls  Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz 
• Outputs  Preamp 200mV/600Ω, Line 1V/1kΩ 
• Speaker Outputs  4Ω, 8Ω, 70V & 100V 
• Power Supply  AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery) 
• Power Consumption  AC: 460VA DC: 6A 
• Dimensions  W450 × H160 × D340 mm 
• Weight  15.70kg